Focbox Tenka

Sale price Price $199.00 Regular price ~~$249.00~~ Unit price per

Shipping calculated at checkout.

ALL NEW FOCBOX TENKA

UNIVERSALLY COMPATIBLE DUAL MOTOR CONTROLLER DELIVERING PERFECTLY SYNCHRONIZED HIGH TORQUE CONTROL WITH DUAL MOTORS

Does your existing electric skateboard need a performance boost?

Get Focbox Tenka to Repair or Upgrade an existing electric skateboard.

With Focbox Tenka you can build any electric skateboard you desire or simply fix up your old broken one.

NOTE: Tenka does not have a Bluetooth module for wireless programming.

WATCH TENKA ESK8 BUILD VIDEOS

Focbox Tenka is based upon the VESC® Open Source Project

What is the Kanji Symbol?

The Kanji Symbol on Focbox Tenka means Strong & Hard

Features & Benefits

Battle Hardened & Shock Proof Design
Built-in High Power ON/OFF Switch
ON/OFF Switch Included
Smart power down
Roll to start
Solid Alloy Case
Full Body Aluminium heatsink
5V 1A Output for external devices
Optional Bluetooth Connectivity
Regenerative braking charges battery
Sensored & Sensorless Motor Control
Powerful start torque on sensorless motors
Robust USB C interface

Performance Specifications

150A Max System Current
70A Continuous Motor Current Per Channel
Voltage rating of components 8V-60V
Compatible battery 3S to 12S
FOC Control for quiet operation
Fully HFI Compatible

Android Application

*Requires Bluetooth Module
Ultra-fast setup wizard
Automatic Motor direction detection
Simple battery configuration
Motor power optimization algorithm
Custom User profiles
Error detection

Software Features

Advanced configuration suite
VESC® Tool & App Compatible
Adjustable Motor & Battery Current Limits
Low & High Voltage limits
Regenerative Battery Current Control

Advanced Features

Battery Protection System Built-in
Over Voltage protection
Current and voltage monitoring on all phases
Field Oriented Control
Rapid duty cycle changes
High RPM & RPM Limits (bi-directional)
Soft backoff for over current & over temp
amp-hour and watt-hour counting

Firmware & GUI

Native Support in VESC main branch
Support Latest Firmware 5.0+
Open Source by Ben Vedder
Source Files
ChibiOS/RT
GUI Built with QT

Control Interface

PPM
Analog
UART
USB C
CAN-bus
I2C

Peripherals & Dimensions

Main PCB: 113mm x 63mm
Outer Case Footprint: 124mm x 70mm
Outer Case Height: 19mm
Motor Wires: 12AWG, 90mm Length
Motor Connectors: MR60M + F
Power Wire: 12AWG 90mm
Power Connector: XT90S

LO R.

Fit perfectly the old Elwing enclosure, and ride >50km/h with >15km range on small 12s2p 18650.

Pierre-Yves B.

Swift delivery in good quality package. Can’t review functionality as not yet mounted

Sean D.

This VESC performs beautifully! Amps to spare under load, drives my 6374's with no effort. Took about 2 minutes to setup with the FocBox VESC tool.

Elmer M.

Reliable so far inexpensive that's the esc superpower simple easy fast shipping

brian G.

It’s hidden tucked away in that little box I made and it’s kickin Ass.

Holger R.

Funktioniert wirklich sehr gut! Bin sehr zufrieden. Einrichtung mit Origin vesc Tool. Empfehle aber das Bluetooth Modul direkt mit zu bestellen!

Malik H.

I messed up a board i bought and decided to go to diy route with the tenka. I got this with the mindset of using 2x titan-X84's and it all works like a charm during setup. Love the plug and use for the motor wires. Did need to change the connector on my battery to power it, but breathed life right after!

Giovanni v.

Upgraded my "off the shelf" board with new wheels, trucks, motors, and a new Tenka esc. It's a brand new beast. Acceleration and braking are great.

Mark S.

Compact design and easy to install. Works well with 6374 motors @ 60A.

Rajwinder S.

Works Just fine. Using Bluetooth from my old unity, and it wirks with vesc tool. Happy so far. Little struggle with tracking and delay

Nick B.

Hey I bought the Tenka almost 5 months ago and hooked it up in a place of a Unity because I couldn’t afford to replace the unity I had accidentally run over and destroyed And in My honest to God opinion it is one of the best ESC’s on the market better than the unity I ran my unity for four months and I can say that the power in on the unity is sketchy and problematic because the postive and negative are so close any overheating could cause a major short . This issue is resolved with the Tenka. I ride my board hard launch it off ramps full throttle hard stops I run the tenka with a Erpm limit of 120000 and 75 amps @ each motor 150a possible continuous draw and i run heavy 90 kv direct drives 110mm wheels this would literally Destroy most other ESC not the Tenka. The Tenka laughs it off barely gets warm. Hard and strong is an understatement. Only better Esc is by VEDDER and trampa but literally 5 times the cost and double the wait so unless your super privileged and super patient buy the Tenka easily better than the unity and comparable to the storm core and vedder escs

Ariel C.

Kudos to Massivestator for coming out with a more affordable version of your very popular and reliable Focbox Unity. Installed already, first time build no issue very straightforward build. So Stoked! will ride soon!

Michael f.

I started with a pre-built board that came with 1500 watt motors on belts. No way that flying hobby ESC was pushing 3000 watts, not even close to half. Solid battery, solid motors but they put a toy between them. Now the Tenka feeds the motors all the amps they were lacking.

Paul L.

It’s a great speed controller, only wish it had bullet connections for the motors.

Nicholas S.

I had a small delay. August Italy goes in holidays so Consumer service was always with me, very great customer service. Focbox no need introduction but Tenka yes looking forward to plug it. Thank you very much guys!

Laurent R.

I did my TT setup with Tenka Vesc for emtb competition (Electric Games 2021 La Teste / France) and I'm totally satisfied with the performances (torque and speed). Now I'm using it with street longboard setup and it perform as well... With 92mm and 12s4p, I ride faster than 60km/h !

Myles B.

Works great easy setup followed the guys propulsion boards for vesc tool setup and copied similar settings. Not sure if theres a setting I'm missing but cant get the board to push start. Otherwise recommended.

Michael T.

Tenka ESC is the best option right now for the price you cannot beat. Grab now before the price go up. I bought four for my recent build as graduation gifts to my nephews.

Vasile c.

Super

Dave

At first i thought wire directions were going to be an issue, but I couldnt have been more wrong. Setup was super clean and easy.