Android APP available for fast setup
Also Compatible with Xmatic, Your's Truly, VESC Tool
Built-in High Anti-Spark Power Switch
Smart power down
Roll to start
FOC Control for quiet operation
Impact Resistant Silicone & Alloy Case
Dual aluminum heatsink
5V 1A Output for external devices
Bluetooth Connectivity
Regenerative braking charges battery
Sensored & Sensorless Motor Control, HFI Compatible
Powerful start torque on sensorless motors
Robust USB C interface

Battery Protection System Built-in
Over Voltage protection
Current and voltage monitoring on all phases
Field Oriented Control
Rapid duty cycle changes
High RPM & RPM Limits (bi-directional)
Soft back-off for over current & over temp
amp-hour and watt-hour counting

Single Motor & Dual Motor Control Configurations
1. Connect single motor into both channels & output full system power into one motor. Great for ebikes.
2. Dual motors, one per channel, splitting system power across two motors. Great for Skateboards.

Control & Programming Interface
PPM, Analog, UART, USB C, CAN-BUS, I2C

Firmware & GUI
Native Support in VESC main branch
Supports Latest Firmware 5.X+
ChibiOS/RT
GUI Built with QT

Open Source by Ben Vedder

Source Files

160A Continuous System Current
80A Continuous Motor Current
300A Max Current
150000 Max ERPM
Voltage rating of components 8V-60V
Compatible battery 3S to 12S

Main PCB: 113mm x 63mm
Outer Case Footprint: 117mm x 64mm
Outer Case Height: 19mm
Motor Wires: 12AWG, 90mm Length
Motor Connectors: Amass MR60M + F
Power Wire: 12AWG 90mm
Power Connector: Amass XT90S
Mounting Hole pattern: 15mm X 30mm

Focbox Unity+ Dual Motor Controller, USB C Cable, PPM Cable, On/Off Switch, MR60 Connectors for motors

We guarantee our products to be defect free. If you receive a product and there's a problem, please contact us and we will help you right away. We test all electronics products twice before shipping to ensure there are no surprises. We also offer 90-day warranty covering manufacturing faults, Plus a 30 Day money back guarantee.

We have electronics engineers in United States & Europe available for VESC™ & FOCBOX™ setup, troubleshooting & fault diagnosis. 

The Focbox Unity+ is great for any electric vehicle, land or water, one or two motors, it doesn't matter. The focbox unity+ is highly programable allowing endless possibilities. Use focbox unity+ for an electric bike, electric scooter, one wheel balance board, electric go kart, electric surfboard. The focbox unity+ is designed to be compatible with any battery & motor combo you choose!

!! WARNING !!
FIRMWARE MUST BE UPDATED TO RUN SINGLE MOTOR CONFIGURATIONS
PLEASE CLICK HERE FOR CUSTOM FIRMWARE

All brushless DC motors guaranteed

Any battery with 3S to 12S, Even a car battery would work (MAX 60V)

Any remote controller that supports VESC. Most commonly PPM or UART.
NOTE: The Focbox Unity+ can be controlled by many different methods, such as ebike hand throttles, via a computer program, or sensors etc.

The Focbox Unity Dual Motor Controller is natively supported in the core VESC® firmware. The Focbox Unity is fully compatible with the VESC® tool on android.
However, If you prefer the simplicity of the FOCBOX UI tools we recommend that you don't go past firmware version 23.46 as it is the last supported firmware compatible with those tools.

You can use these tools with your Focbox Unity
1. Windows PC computer
2. Apple MAC OS
3. Android Phone
NOTE: If you go past firmware version 23.46 you won't be able to use those apps above & you will instead need to use the VESC® tool below, these below tools will also allow you to go to firmware 5.xx and above as they get released.
4. VESC tool on Android
NOTE: There are many other 3rd party apps that are also compatible with the Focbox Unity
5. Metr

WARNING
Massive Stator Support doesn't support firmware versions past 23.46
Updating firmware past 23.46 can brick your device
The latest firmware may have bugs that lead to unexpected events that may result in injury or death.